Spraying the open walls of your building Name: Date: This is a general listing and some of these areas may not apply. Please tell us the answers to only the questions that are relevant to your project. If you are giving us length and heights of walls or roof areas, please include information about window and door sizes. Which wall areas are to be insulated (All, just the first floor, etc.)? How high is the top plate from the floor? Is the installation to be done from the inside or the outside? What are the wall framing sizes (pre-1975 probably 4”), their spacing? Is there strapping, blocking, or other obstructions? Are the walls all-open, closed, or some of each? What are your plans for vapor control? (Polyethylene, dehumidification, ect.) See http://www.foam-tech.com/vaporbarrier/vaporbarrier.htm for more information Are there window weight cavities and do you want them sealed? Is there a specification for the R-value for the walls, what R-value do you want? Are there high moisture levels and from what source? What are your plans for vapor control? (Polyethylene, dehumidification, ect.) See http://www.foam-tech.com/vaporbarrier/vaporbarrier.htm for more information Are the basement walls included in the wall areas to be insulated? Is the framing balloon or platform type framing? Are the wall cavities open to basement? Are the rim joist areas (between the floors) accessible, on which floor levels? What is the outside sheathing material? Are there special problems with masking – is it a timber-framed structure, are there special finishes to protect? - 2 - A Div. Of H.C.Fennell, Inc. Phone (802)222-7740 P.O. Box 65 Rt. 5 No. Thetford, VT 05054 Web: www.foam-tech.com Email: hfennell09@gmail.com FOAM-TECH Specializing in Superinsulation A Div. Of H.C.Fennell, Inc. Phone (802)222-7740 Fax (802) 333-4813 P.O. Box 65 Rt. 5 No. Thetford, VT 05054 Web: www.foam-tech.com Email: hfennell09@gmail.com