Spraying the open rim joist or sills of your building
Name: 
Date: 

This is a general listing and some of these areas may not apply.  Please tell us the answers to only the questions that are relevant to your project.


How high is the sill/rim joist from the floor?


Is the installation to be done from the inside or the outside?


What are the floor joist framing sizes and the spacing? 

 
Is there existing insulation, ductwork, suspended ceilings or other obstructions? 

                     
Are all of the bays open, closed, or some of each?


Is there a specification for the R-value for the sills/rim joist, what R-value do you want?


Are there high moisture levels and from what source?


What are your plans for vapor control? (Polyethylene, dehumidification, ect.)
See http://www.foam-tech.com/vaporbarrier/vaporbarrier.htm for more information


Is the basement or crawlspace walls included with the sills/rim joist areas to be insulated?


Is the framing above the rim joist balloon or platform type framing?


Are the wall cavities open to the rim joist?



Are the rim joist areas (between the floors) accessible? Please specify for each level.


What is the outside framing or sheathing material to be sprayed against?


Are there special problems with masking  – is it a timber-framed structure, are there special finishes to protect?


- 2 -

A Div. Of H.C.Fennell, Inc.
Phone (802)222-7740 
P.O. Box 65 Rt. 5 No. Thetford, VT 05054
Web: www.foam-tech.com Email: hfennell09@gmail.com

          FOAM-TECH
           	Specializing in Superinsulation	


A Div. Of H.C.Fennell, Inc.
Phone (802)222-7740 Fax (802) 333-4813
P.O. Box 65 Rt. 5 No. Thetford, VT 05054
Web: www.foam-tech.com Email: hfennell09@gmail.com